Electric Conversion Kits
Electric Conversion Kits
We are coming into electric conversion projects based on our production, design, and debugging &test ability on electric car/truck/van, electric motor/controller and our big source of other kits from partners.
To convert your old gasoline car/truck, you will need Electric Conversion Kits list:
|
No. |
First Class |
Second Class |
Function Description |
|
1 |
Power-train |
motor |
to drive the vehicle |
|
2 |
motor controller(MCU) |
to control the motor |
|
|
3 |
Vehicle Functional & Connecting Components |
vehicle control unit VCU |
to control the vehicle |
|
4 |
DC-DC converter |
to convert high voltage to low voltage |
|
|
5 |
dashboard |
to show vehicle’s status parameters |
|
|
6 |
high voltage distribution box (PDU) |
to distribute power |
|
|
7 |
hydraulic steering pump/EPS |
to assist steering |
|
|
8 |
brake pump |
to brake the vehicle |
|
|
9 |
accessories: vehicle cables, gear switch, emergency switch, pedal, plugs, others |
as the vehicle’s venation |
|
|
10 |
Power Supply |
battery with BMS |
as power supply |
|
11 |
on board charger |
to charge battery on board |
|
|
12 |
fast charging station |
for fast charging |
|
|
13 |
charging gun |
charging tool |
|
|
14 |
Optional |
gearbox/rear axel |
to lower motor rated speed and raise gear ratio |
|
15 |
air conditioner, PTC heater |
to cool and heat inside the vehicle |
|
|
16 |
TBOX |
vehicle network |
Meanwhile, we design communication protocol for the vehicle to make all parts with CAN communication can understand each other, and you can also provide your communication protocol of VCU if already available.
Our Electric Conversion Platform <suntae-ECK series> including:
Suntae-ECK-5kW48V E-Conversion Pack -- >>>>
Suntae-ECK-7,5Kw72V E-Conversion Pack -- >>>>
Suntae-ECK-10kW96V E-Conversion Pack -- >>>>
Suntae-ECK-15kW144V E-Conversion Pack -- >>>>
Suntae-ECK-25kW310V E-Conversion Pack -- >>>>
Suntae-ECK-30kW310V E-Conversion Pack -- >>>>
Suntae-ECK-40kW360/540V E-Conversion Pack -- >>>>
Suntae-ECK-50kW360/540V E-Conversion Pack -- >>>>
Suntae-ECK-70kW360/540V E-Conversion Pack -- >>>>
About Local Installation:
You will install all parts onto old vehicle. The mechanical installation method may be to couple motor with the original transmission shaft(can add a gearbox if necessary), to install a rear axel with motor coupled. Electric installation follows the vehicle cable’s distribution designed.
This is local job, please get know you must be able to do installation for the complete conversion and fully prepared. Professional mechanical and electric engineers with car service/repair/design/assembly/electric debugging experience team is essential to electric conversion project.
About Debugging Service:
We do debugging for the whole pack of electric conversion in China and prove the pack can work fine in flat road and can climb 20%/25% or required. Moreover, your local debugging is still necessary when pack received. We support local your local debugging by sending engineers. The debugging service is for debugging the whole pack after installed on the old car. All related debugging charge should be considered into your budget.
About Warranty of E-Conversion Kits:
We are responsible to the quality of all electric conversion kits we supply. The warranty of main parts is one year and wearing parts such as encoder, cables, switches, is 3 months. We will provide extra wearing parts with the pack. Quality term rules are stipulated in our company’s quality manual and implemented in cooperation agreement.
